日本折原玻璃应力仪FSM-6000LEUV英文规格参数

Fsm-6000le toughened glass surface stress tester
Nondestructive, fast and high precision
  
 
Fsm-6000le stress tester is the only one in the world to measure the surface stress of chemically and physically strengthened glass.The stress and the depth of the stress layer on the surface of the glass are measured by photoelastic technique.The instrument adopts non-destructive testing method, which is easy to use and operate. It not only shortens the time needed for measurement, but also monitors the glass production process in time. It can well analyze the surface stress of chemically toughened glass, and then judge the degree of product toughening.
 
1、 Instrument features
 
 
1.It has the only measurement method (refractometer photoelastic analysis principle) that other models do not have.
2.Automatic measurement, small personal error caused by the tester.
3.Able to save data by computer, convenient for quality management.
4.Test pieces with poor test conditions can be measured manually.
5.Use LED light source, long service life, up to 10000 hours (before 500 hours).
6.A glass calibration plate is used to minimize machine error.
7. .It can save data automatically by computer, which is convenient for quality management
8.At the same time of continuous measurement and automatic judgment of pass / fail according to the set interval.
9. during continuous measurement, the system automatically saves the measured data and accumulates the measured number (qualified number / unqualified number).
10In addition to continuous measurement, you can also freely choose single measurement, manual measurement and other measurement methods.
11. realize the function of software controlled automatic drip (save the waste of liquid caused by manual operation) (optional function with extra payment).
12At the same time of continuous measurement and automatic judgment of pass / fail according to the set interval
13Automatic measurement of the instrument without manual Click
14. you can set the voice prompt and image color functions by yourself
15. you can set the parameters of good / bad samples and other stages by yourself
16The speed of "continuous automatic measurement" is about 0.3s/piece, which is 3-5 times faster than the old one 
17. automatic monitoring function: under the condition of sample placement, the software will test automatically
 
2、 Technical parameters
 
 
1.        Measurement range of stress value: 0-1000mpa
2.        Measurement accuracy of stress value: ± 5MPa
3.        Measurement range of stress layer depth: 10-100 μ M
4.        Measurement accuracy of stress layer depth: ± 2 μ M
5.        Light source: special LED, wavelength 595 ± 2nm
6.        Measuring objects: chemically strengthened glass and physically strengthened glass
7.        Measurement shape: flat glass 10 mm × 10 mm or more
8.        Prism: s-lal-10 nd = 1.72
9.        PC: special (Windows 10, measurement software installed)
10.    Power supply: AC220V ± 5V 5A
11.    Size: 300 × 600 × 200mm
12.    Weight: About 16KG
 
3、 Configuration list
 
 
1.    1 main machine of stress tester
2.    1 PC (including mainframe, monitor, mouse and keyboard)
3.     One set of test software (including one dongle) is compatible with Corning GG5 / gg6 Glass Stress Detection
4.    1 Calibration piece
5.    1 prism
6.    Developer 2
4、 Precautions for use
 
 
1.    Please handle the tested sample with care when operating the machine to avoid damage to the prism.
2.    When the test image is not clear, please wipe the prism surface and bevel gently with cotton swab stick and industrial alcohol.
3.    It is forbidden to connect the floppy disk or hard disk with Internet, LAN and USB interface containing virus.
4.    Please use the machine indoors to avoid strong light. The indoor air should not be too wet and the pH should be moderate.
5.    Keep away from other chemicals.
6.    Please be sure to keep the matching code dog, and bear the responsibility for any loss.
7.    Please operate the computer configuration of this machine correctly. Do not shut down the machine at will to avoid computer damage.
 
 
Address: 512, Tangfeng business building, No. 354, Liutang Road, Bao'an District, Shenzhen contact: Mr. Huang